Act fast when it counts: In the event of a fire, seconds count and determine the severity of the resulting fire damage. The sooner a developing fire is detected and reported, the less damage there will be.
Aspiration smoke detectors detect fires even during the initial stage of fire development (pyrolysis). Thanks to early detection, the causes of fires can be quickly addressed. This minimizes fire damage and consequential damage, ensuring the best possible protection for people and preventing business interruptions. At WAGNER, we offer reliable and highly effective solutions for early fire detection in a wide variety of environments—and a superior solution compared to conventional optical smoke detectors.
Once a fire is detected, a high-performance fire alarm system triggers an immediate alarm to save lives and protect property.
FUNCTIONAL PRINCIPLE ASD
Aspirating smoke detectors consist of a base unit with a detector module and a connected pipe system. This system is typically installed under the ceiling of the monitored area and has a defined opening at each point where a point-type smoke detector would normally be installed. A fan in the base unit generates the negative pressure necessary to continuously draw air samples from the monitored area. These are fed to a highly sensitive optical detector that examines the air sample for the smallest smoke particles. The smoke detector benefits from the collection effect: Smoke gases are very strongly distributed in the room in the early stages of fire development. Each individual air sampling opening must meet at least the same fire detection requirements as a conventional point-type smoke detector—and with each additional intake port, the smoke density in the system increases.
The integrated air flow sensors constantly check the pipe system for possible blockages and breakages. This ensures that the system operates reliably at all times. The simple maintenance of the system at a central location is another advantage of this technology.
Benefits
High sensitivity for early fire detection and reporting - protection against major damage.
Highly effective fire pattern detection minimizes false alarms even when the system is highly sensitive.
Designed for reliable performance even under demanding conditions—the right solutions for virtually any environment.
High modularity enables optimum configuration for individual requirements as well as simple retrofits.
Discreet early fire detection even in special architecture, no target for vandalism.
Innovative digital tools for less effort and greater safety in planning, commissioning, and maintenance.
The earliest possible, reliable fire detection in every incident.
Can be integrated into a centralized building management system (BMS).
FUNCTIONAL PRINCIPLE FIRE ALARM CONTROL PANELS
The fire alarm control panel is the "brain" of a fire alarm system. It receives and analyzes signals from various fire detectors, such as smoke, heat, or flame detectors, and controls the alarm by triggering pre-programmed actions, such as sending an emergency call, activating smoke extraction systems, or shutting down ventilation systems to prevent the spread of fire. A well-functioning fire alarm control panel (FACP) is therefore essential for building safety and can save lives in the event of an emergency.
Whether it is a new project or a renovation, we can advise you on how to integrate fire detection at the earliest possible stage.
